Search results

There is a continuous drive in automotive sector to shift from conventional lubricants to environmental friendly ones without adversely affecting critical tribological performance parameters. Because of their favorable tribological properties, chemically modified vegetable oils such as palm trimethylolpropane ester (TMP) are one of the potential candidates for the said role. To prove the suitability of TMP for applications involving boundary-lubrication regime such as cam/tappet interface of direct acting valve train system, a logical step forward is to investigate their compatibility with conventional lubricant additives.

In this study, extreme pressure and tribological characteristics of TMP, formulated with glycerol mono-oleate (GMO), molybdenum dithiocarbamate (MoDTC) and zinc dialkyldithiophosphate (ZDDP), has been investigated using four-ball wear tester and valve train test rig. For comparison, additive-free and formulated versions of polyalphaolefin (PAO) were used as reference. Moreover, various surface characterization techniques were deployed to investigate mechanisms responsible for a particular tribological behavior.

In additive-free form, TMP demonstrated better extreme pressure characteristics compared to PAO and lubricant additives which are actually optimized for conventional base-oils such as PAO, are also proved to be compatible with TMP to some extent, especially ZDDP. During cylinder head tests, additive-free TMP proved to be more effective compared to PAO in reducing friction of cam/tappet interface, but opposite behavior was seen when formulated lubricants were used. Therefore, there is a need to synthesize specialized friction modifiers, anti-wear and extreme pressure additives for TMP before using it as engine lubricant base-oil.

In this study, additive-free and formulated versions of bio-lubricant are tested for cam/tappet interface of direct acting valve train system of commercial passenger car diesel engine for the very test time. Another important aspect of this research was comparison of important tribological performance parameters (friction torque, wear, rotational speed of tappet) of TMP-based lubricants with conventional lubricant base oil, that is, PAO and its formulated version.

Depleting reserves of crude oils and their adverse environmental effects have shifted focus toward environment friendly and biobased lubricant base oils. Natural oils and fats act as good lubricants but they have low oxidation and thermal stability which makes them unsuitable for modern day uses. This paper aims to produce trimethylolpropane ester biolubricant from cottonseed oil and study the effects of its use in spark ignition (SI) engines.

In this work, cottonseed oil is converted to TMP lubricant by a two-step based catalyzed esterification. The lubricants thermophysical properties are then analyzed and a 20% blend with synthetic poly-alpha olefin is used in an spark ignition engine.

The produced lubricant has viscosity @100^oC of 4.91 cSt, a viscosity index of 230 and a flash point of 202^oC. When used as a 20% blend in a petrol engine, the rate of oil deterioration was reduced by 18%, however, the overall wear increased by 6.7%. However, this increase is offset by its improved environmental impacts.

In its current state, such a biolubricant can be used as an additive to most commercially available lubricants to improve oil deterioration characteristics and environmental impact. However, further work on improving biolubricant’s wear characteristics is needed for the complete replacement of mineral oil-based lubricants.

The purpose of this study is to evaluate the potentials of nano-additives in enhancement of oxidation and thermal stability of biolubricants thereby, improving the resistance of dispersed nanolubricants to thermal degradation under elevated temperature.

This study evaluates the oxidation stability and tribological performance of nano-enhanced biolubricants. Graphene and maghemite nanoparticles at 0.1% volume concentration were dispersed into coconut oil. Oxidation stability was analysed using a thermal analyser to understand the effect of nano-additives on thermal degradation of lubricants under increasing temperature. In addition, tribological performance and viscosity of the tested lubricants were evaluated using a four-ball friction tester and viscometer according to American Society for Testing and Materials standards.

The results reveal that the oxidation stability of biolubricants dispersed with nano-additives improves due to delayed thermal degradation. The nano-enhanced biolubricants’ oxidation onset temperature was delayed by 18.75 °C and 37.5 °C, respectively, for maghemite (MGCO) and graphene (XGCO) nanolubricants. This improvement imparts the performance viscosity and tribological performance positively. For graphene-enhanced nanolubricant, 10.4% and 5.6% were reduced, respectively, in coefficient of friction (COF)and wear scar diameter (WSD), whereas 3.43% and 4.3% reduction in COF and WSD, respectively, for maghemite-enhanced nanolubricant compared with coconut oil. The viscosity index of nanolubricants was augmented by 7.36% and 13.85%, respectively, for maghemite and graphene nanolubricants.

The excellent performance of nanolubricants makes them suitable candidate as sustainable lubricants for machining with regard to environmental benefits and energy saving.

The effect of graphene and maghemite nanoparticles on the oxidation stability and tribological performance of biolubricants has been investigated. It is an original work and yet to be published elsewhere.